Shenzhen Adkiosk Technology Co., Ltd.
Add to Cart
hd outdoor digital signage video lcd advertising display screen free standing kiosk 55 inch
Specification
| Name | 65''outdoor floor digital signage | ||
| Panel parameter | Size | 65inch LED screen | |
| Display area | 1428.48 × 803.52 mm (H×V) | ||
| Resolution | 1920*1080 | ||
| Brightness | 2000cd/m*2 | ||
| Color | 16.7M | ||
| Aspect ratio | 16:9 | ||
| Response time | 6.5MS | ||
| Contrast | 4000:1 | ||
| View angle | 178°/168°(H/V) | ||
| CPU | HD video and audio decoder chip | ||
| Mainboard | 40A | ||
| System Ram | DDR3 1Gbyte | ||
| System Rom | NAND FLASH 8Gbyte | ||
| IO connectors | 1 x USB host,1 x USB OTG,1 x serial Port,1 x I2C Interface,1 x LVDS Interface ,1 x stereo Audio Out | ||
| Storage | USB/SD card | ||
| Decoding resolution | MAX 1080P | ||
| Audio | built-in HD audio 8(Realtek ALC888) audio system | ||
| Video format | MPEG1,MPEG2,MPEG4,H.264,WMV | ||
| Audio format | MP3 | ||
| Photo format | JPEG,BMP,PNG | ||
| wifi | yes | ||
| OS | Android 4.2.2 | ||
| OSD Language | Chinese, English | ||
| Play Mode | Supports loop playback, timed playback and other multi-player mode | ||
| Environment | Operating Temperature :0°C to 40°C | ||
| System Power Supply | AC 110V~240V,50/60HZ | ||
| Power cord | Yes | ||
| Case | Cold rolled steel with powder coating+ toughened glass surface | ||
The outdoor advertising player is installed in a different way from the indoor advertising player. Because it is installed in an outdoor place, the stability of the fuselage is very high, so it needs to be reinforced during installation. Let’s talk about the installation and reinforcement of outdoor What are the ways of advertising machine.
1. Expand the installation area: because the outdoor advertising machine itself has a small base area and insufficient bearing capacity, the uneven foundation settlement of the roadbed is caused. Therefore, we first need to set up a concrete enclosure or a concrete structure enclosure to increase outdoor advertising The area of the foundation at the bottom of the machine is expanded to expand the bearing capacity of the ground piles by expanding the installation area.
2. Partial grouting of the bottom pile: A method to reinforce the foundation structure by setting up negative pressure columns, driven piles, cast-in-place piles and other piles under or on both sides of the outdoor advertising machine foundation. However, if the roadbed of the installation environment is not very good, it is necessary to adjust and install the roadbed by correcting the deviation of the roadbed.
3. Emergency landing correction: The emergency landing correction is to take countermeasures to stop the downward movement on the side where the outdoor advertising machine is installed with a lot of foundation settlement, and take the emergency landing countermeasures on the other side. The methods of forced landing include: loading steel ingots or stones, building cantilever beams, digging out the soil, and rectifying deviations by water injection.
4. Lifting correction: In the place where the foundation of the skewed outdoor advertising machine has a large subsidence, by adjusting the hoisting amount of each part of the outdoor advertising machine, make it rotate along a certain point or a certain parallel line to make the overall plan view to achieve the purpose of restoring the original point.
The above part is the installation method of the LCD outdoor advertising machine. Of course, we also need to analyze the specific situation during the installation process. Generally speaking, most of the installation methods are through cement grouting and nailing. Way to install.